Open the lens aperture, or unscrew the lens to see if there is light sensitivity;
Whether the driver installation is normal;
Whether to enable continuous acquisition mode when using DEMO.

3. The image color is incorrect and has a color cast.

Solution:

If this happens, you can refer to the manual to set the white balance.

4. Incomplete image capture

Solution:

Confirm whether the camera resolution is adjusted to the maximum;
The DEMO display ratio can adjust the display area;
Adjustment of the field of view. If the camera is connected to a fixed-focus lens, the field of view can only be changed by moving the object distance; if the camera is connected to a zoom lens, the field of view is fixed before focusing; if the camera is connected to a magnifying lens, the field of view can be adjusted by changing the magnification.

5. Too much noise and unclear

Solution:

Refer to the manual to set the gain. The smaller the gain, the less noise and the clearer the image.

6. There is a shadow when shooting moving objects

Solution:

Manually adjust the exposure time and gain to the minimum possible, and use LED light source to fill in the photo.

7. The captured image is too dark

Solution:

Refer to the manual to set the exposure time. The longer the exposure time, the brighter the image.

8. How to wire the external trigger

Solution:

Refer to the manual for external trigger settings, generally connect TRI+ and TRI-, TRI+ is charged; the trigger signal is high and low level trigger or pulse signal trigger.